New Vibezone

[ Home | Contents | Post | Reply | Next | Previous | Up ]

agitator

From: gholam ali radaee
Remote Name: 80.191.19.217

Comments

Dear all, We have a agitator, which comprises motor(1480 RPM, 55KW, gearbox(Input speed-- 1480 r/min, Output speed--52 r/min)and tank(dimension: Diameter—4400mm, High—9620mm), we found when the level reaches from above of impeller to 88%, excessive vibration arises with increasing level(vibration in the bearings of motor are biggest) resource can give me a help, and, furtherly, if I get the root cause--vibration, HOW can I solve it. Please give me a direct suggestion at my Email box------radaee1199@yahoo.com Thanks in advance, gholam ali radaee - bipc. specification of agitator d"shaft "= 120mm No.blades=4 content of tank=citric acid vibration in all points aren't steady and an impact noise is listened from tank . agitator shaft in the near of bottom of tank limited with steady bearing.

Last changed: October 16, 2007